Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - diesel9er

Pages: [1]
1
Here it is and like new Thorn Sherpa! Fits riders who are on the upper side of a 58 to a 60cm. Beautifully made frame of the highest quality with Reynolds 531 Fork and Thorn 969 air hardened main tubes. Let me know what you think!

Thorn Sherpa 610S

Schwalbe Marathon 26" touring tires
Shimano LX 36 spoke hubs
Velocity Razor 36h rims
Shimano LX front and LX rear derailleurs
Shimano Ultegra 8 speed bar end shifters
Shimano UN-55 square taper bottom bracket
Sram 28-38-48 Crank set
Sram PG850 11-30  8 speed cassette
Avid Shorty 4 cantilever brakeset (will allow STI shifter upgrades if preferred)
Cane Creek SCR-5 road brake levers
Cane Creek headset
Bontrager Select 44 cm handlebar and stem (uncut steer tube)
Bontrager rear rack included
Thorn seat post with Velo saddle
Greenfield Stabilizer kickstand included

Send offers to geosat1atgmaildotcom ($1700ish)

2
Classifieds / *2012 Gunnar Grand Tour Gravel Grinder Touring SLX Sweet
« on: February 13, 2014, 02:08:06 pm »
2012 Gunnar Grand Tour Cyclocross Touring TRP Brakes Size 60 - $1899 plus shipping(NWPA)




Selling a 2012 Gunnar Grand Tour. This bike is made for touring but also would make for an excellent Cyclocross bike. Awesome build:

 About 1200 total miles.
 SLX crankset 42/32/24
 SLX front and rear derailers
 A719 36h rims lace to XT hubs
 Ritchey Pro Headset
 FSA stem
 TRP Levers
 TRP CX8.4 CNC'd Linear brakes.
 Bar end shifters.
 9 Speed

 Like new bike with no damage dings or dents. Very low gearing makes climbing a breeze.

 I just bought a brand-new set of TRP CX 8.4 Linear brakes which were just installed. These brakes are top of the line for cross and will lock up the rear wheel, giving you confidence on a large down hill with a heavy load at 40 mph! As good as discs but much lighter.

 The pictures show an A319 wheel on the front with a Schmidt dynamo hub. I would be keeping this and installing the other A719.

 Made in Waterford, Wisconsin by the the old Schwinn Paramount factory. This bike is ready to go anywhere and do anything. This is one sweet rig and the more weight you put on it the better it rides! Check out the Gunnar website: http://gunnarbikes.com/site/

 Seat, racks, and bags for illustration only and will not go with the bike.

 Thanks for looking.
 http://www.flickr.com/photos/40467222@N02/sets/72157634758019967/

 Surly, Seven, Independent, CX, Adventure, Camping, Cross

3
Here's my lightly used Mt. Campee rack. Very stout and excellent Japanese craftsmanship! I'm getting a more stealthy version! Less than 100 miles on this beauty. $100 plus shipping.

4
Waterford Precision Cycles RSE Series Lugged Sport Touring 58cm

Rare and very nice Road Sport Extended bicycle. This is a great distance racing machine, thanks to its lightweight tubing and laid-back handling. Performs well as a stripped down road racer, a light tourer and anything in between.
 
Well equipped:

105 with Flight Deck STI & Computer
105 Crankset 52-42-30
105 Front derailleur
9 Speed rear cassette
XT Rear derailleur
XT Brakes
Ultegra headset
Ultegra Hubs
32 wheelsmith spokes laced to Mavic Open Pro rims
Thompson Elite Seat Post
TTT bars
Conti Contact tires 700c 32mm
New Nitto Technomic Stem
Reynolds Tubing
Henry James Fork Crown and lugs.

Overall great condition. Stops on a dime and shifts smoothly. Just invested $200 for a full tune including new chain and Nitto stem. Absolutely no dents! *seat not included

$1250 plus shipping
geosat1atgmaildotcom

5
Classifieds / Shimano XTR ST-M960 Shifter/Brake lever 9X3
« on: October 15, 2011, 12:32:21 pm »
ONE SHIMANO XTR ST-M960, SHIFTER/BRAKE LEVER SET, 9 x 3 SPEEDS, CABLE ACTUATED BRAKE LEVERS. Very Good Condition.
*Precision indexing with three sets of ball bearings
*Dual Control Lever allows operation from multiple hand positions.
*Lightweight forged alloy brake lever with reach adjust
*Servo-Wave Action Power Adjuster allowing you to fine tune the feel and performance of your brakes
*Use with V-brakes or cable actuated disc brakes

$125 shipped CONUS Originally over $300!!!


6
Believe this is a 2008 Surly LHT. Selling it for a friend who is now onto his next adventure. It's super clean and nice. Can't find a nick, dent, or bump on it! The largest difference between this and a stock Trucker is the cockpit. This one has trekking style bars with Shimano Thumbies. Very comfy and your hands can change positions a good bit. Nice area for the handle bar bag which is Topeak and an Axiom low rider rack. The rear rack is Topeak with a Topeak Clik in top bag. Also has a Satori suspension seatpost. Specs very similar to the newest model with exception of a Sugino triple. Original drops are included if you wish to go back to stock. Comes with Cateye Strada Wireless Computer, Planet Bike Cascadia fenders and "blinky"!  
Saddle stays with me! Sorry. Bike measures 56 c to c or 58 c to top. Standover averages 32.25 in.

$849
http://cleveland.craigslist.org/bik/2555753997.html

7
Classifieds / FS Brooks B17 Standard Sold!
« on: May 26, 2011, 06:45:59 am »
I have a black Brooks B17 for sale. It appears to never have been ridden on but has a minor abrasion near the rear left rivets. I removed the seat from a bike I purchased last year and have never used it myself. Pics on request!:o

8
Gear Talk / Brakes compatible with Sakkit Touring Racks
« on: January 15, 2011, 01:26:54 pm »
Hoping some one has a suggestion to get more braking power on my Sakkit Expedition 26.

I have both the front and rear Sakkit racks on it and currently have the original Shimano Deore LX cantilever brakes on it. I Replaced the front brake with the more modern version of the same brakes.

There's a clearance issue with the front rack that makes it very difficult to find a suitable brake aside from the Shimano canti. Does anyone have a suggestion? I am restricted by width so it's difficult to find anything that works! Just can't get enough leverage. the new brake needs to be smaller than 6" at its widest portion in order to fit.
 
So what should I do? Leave the front brake as it is and replace the rear(the rear brake has no restrictions)?   

Thanks-G.

9
Classifieds / SOLD****Tubus Logo Rear Rack for sale
« on: September 11, 2010, 06:40:01 pm »
I have a Tubus Logo Rack for sale. VGC a small dent on one of the top members. No problems!
$85 shipped? Make an offer. Pics on request. http://www.tubus.com/en/rear-carriers/logo-expedition
email me: geosat1 at gmail dot com

10
Grant Peterson's Rivendell created the beautiful lug work on this nearly pristine example! This is a 57cm Rivendell Romulus from 2003. It's one of the special limited-edition Cantilever models. It is the ideal bike for touring, commuting, Brevets, randonneuring, fire roads, and light trail riding. With the cantilever brakes, it even makes a pretty good cyclocross bike!

The reason I am selling it is it is simply too small.

Seat- WTB
Stem- Nitto Dirt drop
Bar- Nitto Noodle
Headset- Shimano Ultegra
Brake levers- New shimano aero
Brakes- vintage shimano wide profile cantis
Shifters- Dura ace 9sp bar ends
Derailleurs- Shimano 105
Crankset- Sugino XD triple
Wheels- Triple box Sun CR18s laced to Deore
Fendres- SKS full fenders with leather mudflap

Rivendell stopped making these awhile ago because they were too expensive . Now, with the yen to dollar exchange rate, A Japanese-built Rivendell (like this one) costs over 2,000 for the frame, fork and headset only. This built up Riv is worth the ask all day! If you will make a reasonable offer, please do so!
If interested email me: geosat1atgmail.com

 

11
Classifieds / Full Set of JandD Panniers MSRP $350! As new! $249
« on: July 24, 2010, 05:00:51 pm »
Bought a set of JandD panniers for a tour that never happened. Four panniers total 2 mountain panniers front and 2 large mountain rear in black. These are first quality and retail for $350. These were on bicycle for fitting adjustments and and a few trips around the neighborhood that's it! Took 'em off and they're just sitting in my garage. I believe I have all of the tags. These are in  absoulutely new condition. I'll just never use them. May consider trading for Rando type Tweed or Carradice style seatback or large handlebar bags.
PRICE $249 Thanks!

12
Classifieds / Sold: Nice 520 on Ebay lots of upgrades! 58
« on: July 08, 2010, 04:47:42 pm »
Last of the American Framed Trek 520s:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=110555842578&Category=98084&_trkparms=algo%3DLVI%26its%3DI%26otn%3D1

Asking $1299  obo

Much rather sell it here! geosat1atgmail.com

13
Classifieds / WTB Quality Panniers
« on: October 02, 2009, 01:05:04 pm »
Looking for some larger used rear panniers (close to 50L). Prefer Arkel, Ortlieb (not rollers) Bike Packer Plus , Lone Peak, or Carradice. Whatever you have! Email: geosat1 at gmail.com

14
Classifieds / WTB quality front bar bag
« on: December 30, 2008, 01:26:08 pm »
Ok bought a kona and now I am looking for a good quality handlebar bag. I have wider than standard Easton bars on my bike so fit may be a challenge. Looking for a map pocket and a larger type sized bag. Thanks.

Geo
www.abta.org
www.rideforroswell.com

15
Classifieds / WTB Trek or Cannondale Tourer
« on: November 29, 2008, 05:09:08 pm »
Looking for a 1984 or newer Trek or Cannondale tourer. Condition is more important than age. I ride between a 57cm and 61cm
Thanks


Pages: [1]