Bicycle Travel > General Discussion

Cleaning A Bicycle

(1/2) > >>

Bob Guercio:
Hi All,

I just purchased a Schwinn bicycle from the Voyageur 2 series and it could use a good cleaning.  I presume that it is as simple as dousing it with water, drying it and lubricating the chain with 10 to 20 drops of 3 in 1 oil.

Am I correct?

Thanks in advance.

Bob

John Nelson:
There are many ways to wash a bicycle. If you Google "washing a bicycle", you'll find different options. Personally, I get a bucket of soapy water and a rag and wash it like you'd wash a car. I use an old toothbrush to clean the dirtiest and hard-to-reach parts, such as the chain, gears, jockey wheels and derailleurs. I use Simple Green as the cleaner, but you can use almost any detergent. I rinse the bike off with a hose without a spray attachment.

You could use 3-in-1, but I'd recommend visiting a bike shop and picking up a bottle of lube specific for bicycle chains. If you're a cheapskate, you can make your own out of a mixture of motor oil and mineral spirits--Google will help there too. I don't recommend starting a discussion of lubes, as such discussions always go on forever and everybody recommends something different.

You might consider cheap furniture polish (e.g., a "Pledge" knock-off for about $1 a can) to shine up the tubes.

Bob Guercio:

--- Quote from: John Nelson on November 10, 2012, 11:21:50 am ---There are many ways to wash a bicycle. If you Google "washing a bicycle", you'll find different options. Personally, I get a bucket of soapy water and a rag and wash it like you'd wash a car. I use an old toothbrush to clean the dirtiest and hard-to-reach parts, such as the chain, gears, jockey wheels and derailleurs. I use Simple Green as the cleaner, but you can use almost any detergent. I rinse the bike off with a hose without a spray attachment.

You could use 3-in-1, but I'd recommend visiting a bike shop and picking up a bottle of lube specific for bicycle chains. If you're a cheapskate, you can make your own out of a mixture of motor oil and mineral spirits--Google will help there too. I don't recommend starting a discussion of lubes, as such discussions always go on forever and everybody recommends something different.

You might consider cheap furniture polish (e.g., a "Pledge" knock-off for about $1 a can) to shine up the tubes.

--- End quote ---

John,

Thank you.

Just one more question?  Does anything else on the bicycle require lubrication?

Bob

John Nelson:
The chain is the main thing requiring lubrication. However, you might occasionally put a drop on the jockey wheel bearings, the derailleur pivot points, and brake lever pivot points.

Hubs, bottom brackets, headsets, and cables may also require periodic grease.

Park Tool has good online maintenance instructions:

http://www.parktool.com/blog/repair-help/tag/Maintenance

And you might want to pick up Zinn & the Art of Road Bike Maintenance.

http://www.amazon.com/Zinn-Art-Road-Bike-Maintenance/dp/1884737706

Bob Guercio:

--- Quote from: John Nelson on November 10, 2012, 12:22:00 pm ---The chain is the main thing requiring lubrication. However, you might occasionally put a drop on the jockey wheel bearings, the derailleur pivot points, and brake lever pivot points.

Hubs, bottom brackets, headsets, and cables may also require periodic grease.

Park Tool has good online maintenance instructions:

http://www.parktool.com/blog/repair-help/tag/Maintenance

And you might want to pick up Zinn & the Art of Road Bike Maintenance.

http://www.amazon.com/Zinn-Art-Road-Bike-Maintenance/dp/1884737706

--- End quote ---

Thanks John

Navigation

[0] Message Index

[#] Next page