Author Topic: Bikes that we used  (Read 5803 times)

0 Members and 1 Guest are viewing this topic.

Offline MrWaves

Bikes that we used
« on: February 09, 2010, 04:39:17 pm »
While there are loads of tandems out there today, when we rode the second half of the Bikecentinnial (starting at Boulder and turning off towards the end down to San Francisco) there were a few specialist manufacturers just appearing. However being a student I had access to a decent workshop and built a tandem frame out of Reynolds tubing wehre possible and stainless steel tubing for the drain pipe and laterals. I got an eccentric from a tricicle builder and built the bike lugless - using a temporary dexion jig to hold the frame true.

We had some problems with the chainsets, we used standard TA rings, which needed reinforsement on the back centrally spaced tripple. The inner ring having wound up the first time we tried it out. Unfortunately we hadn't locked the bolts in and we spent at least an hour on the first day in the mountains, finding all the bits to put it together again.  Also, while we managed to build up the wheels with 13 gauge spokes, so had no problems there, the back rim eventually cracked at the weld and we had to rebuild the wheel with a new rim along the way. Otherwise we had no problems keeping up a good 100 miles a day average.

I still have the tandem hanging in the halway but don't get the chance to use it unfortunately as nobody trusts me to throw them down hill sides like my younger brother did then!

Offline gerjw

Re: Bikes that we used
« Reply #1 on: November 12, 2010, 07:54:11 am »
I was lucky enough to have a nice bike on the ride. A 1973 Raleigh Pro. Changed the wheels (Phil hubs and Super Champion 58 rims 40 spoke rear) and put on a triple crank (Sugino) and a long cage derailleur (Campy Rally) and off I went. In my group however there were all sorts of machines. We had four Dutch riders and two of them had mild steel frames, steel rims and steel fenders. I saw all manner of bikes along going the other way. One highlight was to run into some neighbors of mine at home in San Jose on Hoosier Pass. They were riding a Jeffrey Richmond triple. It was a couple with their nine year old daughter (in the middle).

Offline tomg

Re: Bikes that we used
« Reply #2 on: November 28, 2010, 09:11:51 pm »
1rst xUSA, self contained, e-w, 1982

Bike used:1972 Atala "Giro de' Atala" steel frame (straight)

It was completely rebuilt (except main-frame/fork)
Randonneir Handlebars, swan stem, grab-on padding, "Pro" Brooks saddle, weinmann side-pull brakes, sugino triple crank-set, ense(?) fenders, blackburn rackset (high, not low rider), and 1/4 x 27 inch tires
Re-commisioned to commuter, Stolen 1996...............

2nd xUSA, self contained, 2011

Bike Nash rebuild 1994 6000t steel chro-moly d/b (last tour 2004 east coast NJ -Maine) or
Bike Nash build 2009 Aluminum copy of Surly LHT
to continue........!